How To Disconnect The Blade Control Cable On A 247.203791 Sears Lawn Tractor (Youtube)?

Photodisc/Photodisc/Getty Images

Craftsman cable-actuated lawn mowers provide users with a wide diversity of mower cutting speeds in order to meet nearly all habitation mowing requirements. The cable setting is mill adjusted at the fourth dimension of manufacture, but periodic maintenance may still be required due to normal vesture and tear of components if you lot cannot hands shift into all 6 speeds. Fortunately, Craftsman has made adjusting the speed mechanism very easy to practice. Information technology can be accomplished by most operators in under 10 minutes past post-obit a few elementary steps.

Park your mower on a shine level surface. Disconnect the spark plug wire from the spark plug (located at the front end on the engine) and attach it to the grounding post located several inches away. This will prevent accidental starting.

• Craftsman cablevision-actuated lawn mowers provide users with a wide variety of mower cutting speeds in order to meet nearly all abode mowing requirements.
  
• The cable setting is factory adjusted at the fourth dimension of industry, but periodic maintenance may nevertheless exist required due to normal wear and tear of components if you cannot hands shift into all half-dozen speeds.

Locate the adjustable cable bracket located on the left side of the lawn mower engine. Follow the speed aligning cable from the handle bars to the engine if you are not sure. Slightly loosen the nut (using an adjustable wrench) which holds the adjustable cable bracket in place.

Move the shift lever (located on the handlebars) into the high speed position. This is the 6th position (abroad from yous) when standing behind the mower.

Wiggle the adjustable cable bracket slightly to make sure information technology is free, so slowly slide the subclass towards the rear of the lawn mower as far every bit it volition go. Do not utilise unnecessary strength, but move it firmly. This action volition marshal the pulleys beneath the deck in the necessary position.

• Locate the adaptable cable bracket located on the left side of the backyard mower engine.
  
• Wiggle the adjustable cablevision bracket slightly to make sure it is free, then slowly slide the subclass towards the rear of the lawn mower as far equally it will get.

Tighten the adjustable cable subclass nut securely. Try to wiggle the bracket back and forth several times to make sure it is firmly held in identify. Reconnect the spark plug wire to the spark plug. Beginning the mower and test for normal operation in all six speeds.

Periodically bank check to be sure the adjustable cablevision bracket nut does not loosen due to engine vibration.

Source: https://www.gardenguides.com/how_6366372_adjust-cable-craftsman-lawn-mower.html

Posted by: schellfromen.blogspot.com

Share this post